Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GQ4000X
Title: LIGHTING (EXT): REAR LIGHT ASSEMBLY: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL REAR LIGHT ASSEMBLY

(a) Engage the clip and install the rear light.

(b) Tighten the 2 nuts.

Torque: 6.4 N·m (65 kgf·cm, 56 in·lbf)

(c) Connect the connector.

2. INSTALL BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

4. INSTALL BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

5. INSTALL BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

6. INSTALL BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

7. INSTALL BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

8. INSTALL BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+